• Melting shop:Nine induction melting furnaces of various capacities
• Molding lines:Four moulding lines,One line of jolt squeeze machines,Two lines of DISAMATIC machines,One flour molding line
• Three shot blast machines
• Two breaker drums
• Technical office for design activities and Pattern making workshop for manufacturing araldite patterns.The success of grinding media patterns had been proved through more than 20 years of grinding media production.

• Four continuous heat treatment furnaces
• Seven tempering furnaces
• One device for quantitative analysis of retained austenite. Retained austenite, being one of these undesirable phases, is quantitatively measured after heat treatment to assure that it is lower than a definite limit.

UCF has a group of laboratories that satisfy the needs of :

• process control plans implemented during production running
• The needs of inspection and testing activities of finished products

UCF laboratory facilities include :

• Two spectrometers for chemical analysis
• Complete set of devices for testing new sands and moulding sand mixtures, carrying out tests as:Green compression strength, shear strength, permeability,compactibility, moisture content, grain size.
• Stationary and portable hardness testing devices ( HB, HV, HRC )
• Metallographic laboratory with optical microscopes of magnification X 1200 attached with the necessary devices of grinding and polishing for samples preparation for the metallographic examination
• Non destructive testing for invisible crack detection.

• It is equipped with all the necessary machines and tools for conducting machining operations as per customer requirements.
• The machining workshop has a forging line for producing bolts necessary for fixing mill liners. Bolt threads are made by thread rolling machine